One-Cycle Control Technology!
No Programming and No DSP!

Converts AC to DC voltage to power DC loads!
Converts DC to AC current to return power to the utility grid.
Source/Sink sinusoidal 3-Phase Current at unity Power Factor.

Provides < 5% THD sinusoidal current. Weighs less than 50 lbs (23 kg)
Standard 3U (5.25”),19” Rackmount, 23” Depth
Wall mount and Bench Mount optional

Applications:
Grid-Tied Inverters
Elevators
Electric Vehicles w/regenerative braking
AC and DC Motors
Grid-Tied Energy Storage

Technical Specifications: At full rated load
Operating Efficiency: > 97%
Input/Output Current %THD: < 5%
Input/Output Power Factor: > 0.98
Overload: 110% rated RMS current for 1 hour
Operating Temperature Range: 0C (32F ) to +40C (+104F )
Operating Altitude Range: 4000 ft. at 40C and 100% Rated Load
Operating Relative Humidity: 0 to 95% without condensation
Storage Temperature Range: -10C
(14F ) to +55C (122F )
Audible Noise at 1m (3 ft): < 60 dBA

Optical Isolated Fault Signals:
Power Supply, De-saturation, OverTemp, DC Over Current, DC Over Voltage, DC Under Voltage, AC Over Current, AC Over Voltage

BDC050A34802/D8000R -
OCC Bidirectional Converter
Ratings:
0 - 50 Amp RMS Injected
320 - 552 Volts RMS
3 Phase - 3 Wire Delta
47 - 63 Hz
50 Amp DC Maxiumum
800 Volts DC

BDC100A32402/D3650R -
OCC Bidirectional Converter
Ratings:
0 - 100 Amp RMS Injected
175 - 240 Volts RMS
3 Phase - 3 Wire Delta
47 - 63 Hz
100 Amp DC Maximum
365 Volts DC

Also Available: 5 kW and 15 kW @ 208 Volts AC

Options:
Brackets for wall or rack mounting. Rubber feet for bench mounting.

LED status display indicators: Green – Normal Operation
Red – Fault Shutdown
Yellow – Over Temp. Warning

Optical isolated user interface connection for remote Start/Stop, control and Fault signals.

Microprocessor interface connectors, scaled to 5V logic fault signals, and analog voltage and current signals.

Downloads:
- OCC BDC PDF Brochure...